商品介绍
首页 DeFibreRator machine DeFibreRator machine 纤维重整机

DeFibreRator machine 纤维重整机

规 格 SPECIFICATION: FEEDING SPEED 90 M/min WORKING VENEER LENGTH 968~1270㎜ WORKING VENEER THICKNESS 1.5~2.2 or 2.4~3.5㎜ MACHINE DIMENSION L1200 ㎜ × W 2000 ㎜ × H 1300 ㎜










使用纤维重整机的效果
Effect of Using DeFibreRator Machine

1. 木板未经辗压时,水份由四边散发,散发速度慢且不平均,“辗压针轮”能完全穿透木板纤维,让木
板能由表面散发水份,烘房烘干木板的速度也会变快,且含水率平均,使木板产量增加。
According to the past experiences, the veneer without flattening out makes
the moisture content spread out slowly and unequally from the sides. By using
the technique of anvil roll can help penetrate the veneer fiber to spread out
the moisture from the surface of itself. Also, it not only shortens the time of
drying those veneer by the heat but increase the good quality production of
the veneer

2. “针轮”会破坏木板的纵纤维,使木板柔软,”直切刀”会破坏木板的直纤维,使木板平坦。
The technique of using anvil roll helps break the vertical fiber of veneer to
make it becomes soft and vertical knife breaks its cellulose fibers to make it
become plane.
3. 平坦柔软的木板,用”拼板机”拼接时,较顺畅,整理木板时也较省时。
Under this kind of circumstance, people become efficient and work smoothly
while using the core builder/composer to collect the veneers.
4. 使用”布胶机”布胶时,胶水的涂布量均匀,因木板平坦,胶合度佳,脱胶机会减少,胶轮也较不
易损坏。
With the good quality of the veneers, users can equally spread out the glue by
using the glue spreader and trim down the percentage of failure. More, it
decreases the damage of using the machine.
5. 木板冷压时,会减少夹心的状况,木板接缝重叠率也会降低
It reduce the situation of having intervals between veneers while
cold-forming them and also decrease the percentage of joint overlapping in
veneers.
6. 木板经热压后,面、中、底板能更密合,且不会产生脱胶也不会高低不平。
Then, hot pressing helps the veneer can be close-sealed together and the glue
won’t be taken off easily or unstable.
7. 辗压后制成的三合板品质平度佳,强度及承载力合乎标准,倘若没使用辗压设备,则在制程中会产
生木板不良率增加,而浪费过多的材料及产能。
The products-plywood, by using this technique is certified including its
quality, load-bearing capacity and intensity


订阅商品讯息订阅商品讯息  
Powered by www.url.com.tw