Products
Home DeFibreRator machine DeFibreRator machine

DeFibreRator machine

SPECIFICATION: FEEDING SPEED 90 M/min WORKING VENEER LENGTH 968~1270㎜ WORKING VENEER THICKNESS 1.5~2.2 or 2.4~3.5㎜ MACHINE DIMENSION L1200 ㎜ × W 2000 ㎜ × H 1300 ㎜










Effect of Using DeFibreRator Machine

1.
According to the past experiences, the veneer without flattening out makes
the moisture content spread out slowly and unequally from the sides. By using
the technique of anvil roll can help penetrate the veneer fiber to spread out
the moisture from the surface of itself. Also, it not only shortens the time of
drying those veneer by the heat but increase the good quality production of
the veneer

2. 
The technique of using anvil roll helps break the vertical fiber of veneer to
make it becomes soft and vertical knife breaks its cellulose fibers to make it
become plane.
3. 
Under this kind of circumstance, people become efficient and work smoothly
while using the core builder/composer to collect the veneers.
4.
With the good quality of the veneers, users can equally spread out the glue by
using the glue spreader and trim down the percentage of failure. More, it
decreases the damage of using the machine.
5.
It reduce the situation of having intervals between veneers while
cold-forming them and also decrease the percentage of joint overlapping in
veneers.
6. 
Then, hot pressing helps the veneer can be close-sealed together and the glue
won’t be taken off easily or unstable.
7.
The products-plywood, by using this technique is certified including its
quality, load-bearing capacity and intensity


Subscribe to Merchandise NewsSubscribe to Merchandise News  
Powered by www.url.com.tw