商品介紹
首頁 DeFibreRator machine DeFibreRator machine 纖維重整機

DeFibreRator machine 纖維重整機

規 格 SPECIFICATION: FEEDING SPEED 90 M/min WORKING VENEER LENGTH 968~1270㎜ WORKING VENEER THICKNESS 1.5~2.2 or 2.4~3.5㎜ MACHINE DIMENSION L1200 ㎜ × W 2000 ㎜ × H 1300 ㎜










使用纖維重整機的效果
Effect of Using DeFibreRator Machine

1. 木板未經輾壓時,水份由四邊散發,散發速度慢且不平均,“輾壓針輪”能完全穿透木板纖維,讓木
板能由表面散發水份,烘房烘乾木板的速度也會變快,且含水率平均,使木板產量增加。
According to the past experiences, the veneer without flattening out makes
the moisture content spread out slowly and unequally from the sides. By using
the technique of anvil roll can help penetrate the veneer fiber to spread out
the moisture from the surface of itself. Also, it not only shortens the time of
drying those veneer by the heat but increase the good quality production of
the veneer

2. “針輪”會破壞木板的縱纖維,使木板柔軟,”直切刀”會破壞木板的直纖維,使木板平坦。
The technique of using anvil roll helps break the vertical fiber of veneer to
make it becomes soft and vertical knife breaks its cellulose fibers to make it
become plane.
3. 平坦柔軟的木板,用”拼板機”拼接時,較順暢,整理木板時也較省時。
Under this kind of circumstance, people become efficient and work smoothly
while using the core builder/composer to collect the veneers.
4. 使用”佈膠機”佈膠時,膠水的塗佈量均勻,因木板平坦,膠合度佳,脫膠機會減少,膠輪也較不
易損壞。
With the good quality of the veneers, users can equally spread out the glue by
using the glue spreader and trim down the percentage of failure. More, it
decreases the damage of using the machine.
5. 木板冷壓時,會減少夾心的狀況,木板接縫重疊率也會降低
It reduce the situation of having intervals between veneers while
cold-forming them and also decrease the percentage of joint overlapping in
veneers.
6. 木板經熱壓後,面、中、底板能更密合,且不會產生脫膠也不會高低不平。
Then, hot pressing helps the veneer can be close-sealed together and the glue
won’t be taken off easily or unstable.
7. 輾壓後製成的三合板品質平度佳,強度及承載力合乎標準,倘若沒使用輾壓設備,則在製程中會產
生木板不良率增加,而浪費過多的材料及產能。
The products-plywood, by using this technique is certified including its
quality, load-bearing capacity and intensity


訂閱商品訊息訂閱商品訊息  
Powered by www.url.com.tw